Autotriz Wheel Ceramic Coating 50ml (12 months)
PROTECTS UNDER EXTREME CONDITIONS
Autotriz Wheel & Caliper is an extremely durable coating for any type of wheels and calipers. Its main advantage is its resistance to wheel cleaners with a pH ranging between 1 and 11. Its superb self-cleaning abilities help repel road grime, brake dust from brake pads and impregnation of iron particles from the brake discs, thus highly reduces cleaning effort.
Instructions For Use
Clean the surface thoroughly to be free of tar, iron particles, etc. on the surface.
Use the white microfiber suede cloth that comes with the box or use the applicator of your preference. Foam applicators can also be used as a substitute
Apply AUTOTRIZ Wheel & Calliper Coating using normal pressure on the applicator.
Make sure the area is well covered. Wait a minute and let the coating cure
Remove residue (not always necessary, depends on the surface) If you are working on a shiny or black-colored surface make sure you donāt have any high spots or streaks when you are done.
Wait 60 minutes before adding a layer for maximum protection.
Allow curing of coating to begin. Curing can be accelerated using IR Lamps. Follow the lamp manufacturer's recommended settings.
Keep coating away from all polish and compound dust during the curing process.
TOOLS
Depending on the substrate Wheel CoatingĀ can be applied with microfiber applicators. The product is also suitable for spray application.
Ā
Spray application:
Process: HVLP-compressed air
Spray gun: e.g. SATA minijet HVLP
Working pressure: ca. 2 ā 3 bar
Nozzles: 0.8 ā 1.3 mm
Ā
The spray gun can be cleaned with n-butyl acetate, for example.
TECHNICAL DATAĀ
Appearance:Ā Colourless
ā
Density:Ā ca. 0,76 g/cm3
ā
Base: Polysiloxane
ā
Curing: Normal ambient temperature/ 80Ā°C
ā
Shelf Life: 12 months
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Original: $80.71
-65%$80.71
$28.25Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
PROTECTS UNDER EXTREME CONDITIONS
Autotriz Wheel & Caliper is an extremely durable coating for any type of wheels and calipers. Its main advantage is its resistance to wheel cleaners with a pH ranging between 1 and 11. Its superb self-cleaning abilities help repel road grime, brake dust from brake pads and impregnation of iron particles from the brake discs, thus highly reduces cleaning effort.
Instructions For Use
Clean the surface thoroughly to be free of tar, iron particles, etc. on the surface.
Use the white microfiber suede cloth that comes with the box or use the applicator of your preference. Foam applicators can also be used as a substitute
Apply AUTOTRIZ Wheel & Calliper Coating using normal pressure on the applicator.
Make sure the area is well covered. Wait a minute and let the coating cure
Remove residue (not always necessary, depends on the surface) If you are working on a shiny or black-colored surface make sure you donāt have any high spots or streaks when you are done.
Wait 60 minutes before adding a layer for maximum protection.
Allow curing of coating to begin. Curing can be accelerated using IR Lamps. Follow the lamp manufacturer's recommended settings.
Keep coating away from all polish and compound dust during the curing process.
TOOLS
Depending on the substrate Wheel CoatingĀ can be applied with microfiber applicators. The product is also suitable for spray application.
Ā
Spray application:
Process: HVLP-compressed air
Spray gun: e.g. SATA minijet HVLP
Working pressure: ca. 2 ā 3 bar
Nozzles: 0.8 ā 1.3 mm
Ā
The spray gun can be cleaned with n-butyl acetate, for example.
TECHNICAL DATAĀ
Appearance:Ā Colourless
ā
Density:Ā ca. 0,76 g/cm3
ā
Base: Polysiloxane
ā
Curing: Normal ambient temperature/ 80Ā°C
ā
Shelf Life: 12 months
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
Ā
